Linux系统中网络配置详解pop2 109/tcp pop-2 postoffice # POP version 2 pop2 109/udp pop-2 pop3 110/tcp pop-3 # POP version 3 pop3 110/udp pop-3 sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP auth 113/tcp authentication tap ident sftp 115/tcp uucp-path 117/tcp nntp 119/tcp readnews untp # USENET News Transfer Protocol ntp 123/tcp ntp 123/udp # Network Time Protocol netbios-ns 137/tcp # NETBIOS Name Service netbios-ns 137/udp netbios-dgm 138/tcp # NETBIOS Datagram Service netbios-dgm 138/udp netbios-ssn 139/tcp # NETBIOS session service netbios-ssn 139/udp imap2 143/tcp imap # Interim Mail Access Proto v2 imap2 143/udp imap (实际上,以上仅仅是/etc/services的一部分,限于篇幅没有全部写出) 在这个文件中,为了安全考虑,我们可以修改一些常用服务的端口地址,例如我们可以把telnet服务的端口地址改为52323,www的端口改为8080,ftp端口地址改为2121等等,这样仅仅需要在应用程序中修改相应的端口即可.这样可以提高系统的安全性. /etc/inetd.conf文件是inetd的配置文件, 首先要了解一下linux服务器到底要提供哪些服务。一个很好的原则是" 禁止所有不需要的服务"，这样黑客就少了一些攻击系统的机会./etc/inetd.conf范例文件如下: # # inetd.conf This file describes the services that will be available # through the INETD TCP/IP super server. To re-configure # the running INETD process, edit this file, then send the # NETD process a SIGHUP signal. # # Version: @(#)/etc/inetd.conf 3.10 05/27/93 # # Authors: Original taken from BSD UNIX 4.3/TAHOE. # Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> # # Modified for Debian Linux by Ian A. Murdock <imurdock@shell.portal.com> # # Modified for RHS Linux by Marc Ewing <marc@redhat.com> # # <service_name> <sock_type> <proto> <flags> <user> <server_path> <args> #服务名 socket类型 协议 动作 拥有者 服务进程路径名 掉用参数 #nowait 表示在相应一个网络连接之后,服务进程在释放旧的联接之前可以接受 #新的连接请求,wait 则表示必须在旧连接清除之后才能接收新的连接. # Echo, discard, daytime, and chargen are used primarily for testing. # To re-read this file after changes, just do a 'killall -HUP inetd' # #echo stream tcp nowait root internal #echo dgram udp wait root internal #discard stream tcp nowait root internal #discard dgram udp wait root internal #daytime stream tcp nowait root internal #daytime dgram udp wait root internal #chargen stream tcp nowait root internal #chargen dgram udp wait root internal #time stream tcp nowait root internal #time dgram udp wait root internal # # These are standard services. # ftp stream tcp nowait root /usr/sbin/tcpd in.wuftpd -l -a telnet stream tcp nowait root /usr/sbin/tcpd in.telnetd # # Shell, login, exec, comsat and talk are BSD protocols. # #shell stream tcp nowait root /usr/sbin/tcpd in.rshd #login stream tcp nowait root /usr/sbin/tcpd in.rlogind #exec stream tcp nowait root /usr/sbin/tcpd in.rexecd #comsat dgram udp wait root /usr/sbin/tcpd in.comsat #talk dgram udp wait root /usr/sbin/tcpd in.talkd #ntalk dgram udp wait root /usr/sbin/tcpd in.ntalkd #dtalk stream tcp waut nobody /usr/sbin/tcpd in.dtalkd # Pop and imap mail services et al # #pop-2 stream tcp nowait root /usr/sbin/tcpd ipop2d #pop-3 stream tcp nowait root /usr/sbin/tcpd ipop3d #imap stream tcp nowait root /usr/sbin/tcpd imapd # # The Internet UUCP service. # #uucp stream tcp nowait uucp /usr/sbin/tcpd /usr/lib/uucp/uucico -l # # Tftp service is provided primarily for booting. Most sites # run this only on machines acting as "boot servers." Do not uncomment # this unless you *need* it. # #tftp dgram udp wait root /usr/sbin/tcpd in.tftpd #bootps dgram udp wait root /usr/sbin/tcpd bootpd # # Finger, systat and netstat give out user information which may be # valuable to potential "system crackers." Many sites choose to disable # some or all of these services to improve security. # #finger stream tcp nowait root /usr/sbin/tcpd in.fingerd #cfinger stream tcp nowait root /usr/sbin/tcpd in.cfingerd 上一篇：Linux 网管 123 --- 第13章. 其他的问题 1.系统损毁 下一篇：如何配置linux与win2000/NT 双重引导 更多相关文章
|
推荐文章
精彩文章
|
