Linux中国 Linux中国门户站!
设为主页 设为主页
收藏本站 收藏本站
 
当前位置 :首页 ->Linux技术 ->系统管理 ->正文

基于heartbeat的NFS HA实现

来源:Linux-cn.com 作者:Webmaster 时间:2007-05-05 点击: [收藏] [投稿]

基于heartbeat的NFS HA实现

Version: 1.0
Maintainer: hutuworm
Update: 2003-09-30

※系统说明

本系统由两台Dell PowerEdge 2650(HUTUNFS1 & HUTUNFS2)和一台磁盘阵列组成,磁盘阵列
划分为ld0 & ld1两个RAID5逻辑盘(Logical Disk)。操作系统为RedHat 7.3 Linux。设置NFS HA
的目的是,当HUTUNFS1失败时HUTUNFS2自动接管。

1 安装heartbeat 1.0.3 for RedHat 7.3
http://www.ultramonkey.org/download/heartbeat/1.0.3/redhat_7.3/
heartbeat-1.0.3-1.rh.7.3.1.i386.rpm
heartbeat-ldirectord-1.0.3-1.rh.7.3.1.i386.rpm
heartbeat-pils-1.0.3-1.rh.7.3.1.i386.rpm
heartbeat-stonith-1.0.3-1.rh.7.3.1.i386.rpm 

2 设置配置文件:
HUTUNFS1为master,HUTUNFS2为slave。

2.1 HUTUNFS1 192.168.0.30
/etc/ha.d/ha.cf 
# define nodes in cluster 
node hutunfs1
node hutunfs2 
# time a system must be unreachable before considered dead (seconds) 
deadtime 5 
# set up for the serial heartbeat pulse 
# 如果两台服务器之间用心跳线连接,heartbeat支持串行心跳监测。
#serial /dev/ttyS0 
#baud 19200 
# interface to run the network heartbeat pulse 
udp bond0

/etc/ha.d/authkeys 
auth 3 
3 md5 hutuworm

/etc/ha.d/haresources 
hutunfs1 192.168.0.30 Filesystem::/dev/sdc1::/ld0::ext3 nfslock nfs 
hutunfs1 192.168.0.30 Filesystem::/dev/sdd1::/ld1::ext3 nfslock nfs 

/etc/exports 
#
# Export the shared disk, allowing read/write access and 
# synchronous I/O with no write delay. 
/ld0 192.168.0.*(rw,sync,no_wdelay) 
/ld1 192.168.0.*(rw,sync,no_wdelay)

/etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 hutunfs1 localhost.localdomain localhost
192.168.0.30 hutunfs1
192.168.0.31 hutunfs2

2.2 HUTUNFS2 192.168.0.31
/etc/ha.d/ha.cf
/etc/ha.d/authkeys 
/etc/ha.d/haresources 
/etc/exports 
以上四个文件与HUTUNFS1相同

/etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 hutunfs2 localhost.localdomain localhost
192.168.0.30 hutunfs1
192.168.0.31 hutunfs2

3. 在HUTUNFS1 & HUTUNFS2上运行ntsysv,确认nfs服务关闭,heartbeat服务打开。
先重起HUTUNFS1,再重起HUTUNFS2,HUTUNFS1作为master运行,HUTUNFS2作为slave运行。
当HUTUNFS1失效时,HUTUNFS2将自动接管192.168.0.30,并同时开启NFS服务。




 如果您对本文有任何疑问或者建议,请到讨论区发表您的意见: >> 论坛入口 <<



上一篇:使用TCP/IP协议栈指纹进行远程操作系统辨识   下一篇:如何通过对TOS的优化来提高防火墙的整体性能

文章评论】 【收藏本文】 【推荐好友】 【打印本文】 【我要投稿】 【论坛讨论
更多相关文章
Power by linux-cn.com 粤ICP备05006655号