?? xiafs Linux Xiafs ??
? __________________________________________________________ ?
______________________________________________________________ ?
? < OK > ?
______________________________________________________________ ?
选择 ext2 档案系统後, 接着又询问我们是否要真的执行建造动
作 (相当於DOS的格式化动作), 假如这是我们第一次安装, 很可能我
要就要选择 Format 或 Check, 但是如果确定以前已经做过, 这里也
可以选择 No。 至於 Format 与 Check的不同, Check 除了做 Format
动作外, 还额外检测硬碟是否有坏轨, 假如您硬碟有瑕疵的话, 记得
选用 Check。
<< 画面 4-18 >>
________________________ FORMAT PARTITION ________________________
? If this partition has not been formatted, you should format it. ?
? NOTE: This will erase all data on it. If you are trying to ?
? upgrade an existing Linux partition, you should use setup from ?
? your hard drive, not from the boot/root disk. (The versions of ?
? setup supplied on the hard drive and the boot/root disk differ) ?
? Would you like to format this partition? ?
? ________________________________________________________________??
?? Format Quick format with no bad block checking ??
?? Check Slow format that checks for bad blocks ??
?? No No, do not format this partition ??
? ________________________________________________________________??
____________________________________________________________________?
? < OK > ?
____________________________________________________________________?
以下我选择 Format, 系统就立刻执行 mkfs 动作, 额外一提, 这
动作相同於 $ mke2fs /dev/hdb3 101304 指令, 读者朋友以後进行正
常系统管理时, 会用到这命令。
<< 画面 4-19A >>
______________________SELECT INODE DENSITY ______________________
? Ext2fs defaults to one inode per 4096 bytes of drive space. ?
? If you're going to have many small files on your drive, ?
? then you may need more inodes (one is used for each file ?
? entry). You can change the density to one inode per 2048 ?
? bytes, or even per 1024 bytes. Select '2048' or '1024', or ?
? just hit enter to accept the default of 4096 bytes. NOTE: ?
? If you are going to run from CD using a small (<60MB) ?
? partition, use 1024 to be safe. Each link uses an inode and ?
? it's easy to run out of space. ?
如果您对本文有任何疑问或者建议，请到讨论区发表您的意见:
>>
论坛入口 <<
上一页 1 2 3 4 5 6 7 8 9 10 1112 13 下一页
上一篇：轻轻松松的安装Slackware Linux -- 0.自序,观念篇 下一篇：轻轻松松的安装Slackware Linux -- 5.其他非标准安装程序解析
|
设为主页
收藏本站
相关文章: