设为主页
收藏本站
当前位置: >
首页
->
Linux技术
->
内核研究
->
Linux内核配置选项
相关分类:
入门与提高
系统管理
网络应用
嵌入式系统
内核研究
服务器相关
发行版专区
Linux程序设计
Linux安全
BSD相关
桌面应用
站内搜索:
智能模糊搜索
仅搜索标题
一次即大功告成 Linux内核升级全过程
(04-19)
使用 Linux 系统调用的内核命令
(04-22)
推荐:Linux用户态与内核态的交互
(04-11)
Linux内核配置选项
(04-22)
Linux 2.6 内核的 Initrd 机制解析
(04-11)
使用 Linux 系统调用的内核命令
(04-22)
Linux 和对称多处理
(04-22)
Relay:一种高效的数据传输技术
(04-22)
使用 SystemTap 调试内核
(04-22)
配置FreeBSD内核
(04-22)
Linux内核配置选项
作者:
来源:
CU
点击:
日期:
2007-04-22 [
收藏
] [
投稿
]
IE是否经常中毒?推荐您
08.20.01.03、< > SAA5246A, SAA5281 Teletext processor
08.20.01.04、< > SAA5249 Teletext processor
08.20.01.05、< > SAB3036 tuner
08.20.01.06、< > Zoran ZR36057/36067 Video For Linux
08.20.01.07、< > Philips SAA7134 support
08.20.01.08、< > Siemens-Nixdorf 'Multimedia eXtension Board'
08.20.01.09、< > Philips-Semiconductors 'dpc7146 demonstration board'
08.20.01.10、< > Hexium HV-PCI6 and Orion frame grabber
08.20.01.11、< > Hexium Gemini frame grabber
08.20.01.12、< > OmniVision Camera Chip support
08.20.02、Radio Adapters --->
08.20.02.01、< > GemTek PCI Radio Card support
08.20.02.02、< > Guillemot MAXI Radio FM 2000 radio
08.20.02.03、< > Maestro on board radio
08.20.02.04、Digital Video Broadcasting Devices --->
08.20.02.04.01、[ ] DVB For Linux
08.20.02.04.02、< > DVB Core Support
--- Supported SAA7146 based PCI Adapters
--- AV7110 cards
08.20.02.04.03、[ ] AV7110 OSD support
08.20.02.04.04、< > Budget cards
08.20.02.04.05、< > Budget cards with onboard CI connector
08.20.02.04.06、< > Budget cards with analog video inputs
08.20.02.04.07、< > AV7110 cards with Budget Patch
--- Supported USB Adapters
08.20.02.04.08、< > Technotrend/Hauppauge Nova-USB devices
08.20.02.04.09、< > Technotrend/Hauppauge USB DEC devices
08.20.02.04.10、< > DiBcom USB DVB-T devices (see help for a complete device list)
08.20.02.04.11、[ ] Enable support for some misdesigned (see help) devices, which identify wit
08.20.02.04.12、[ ] Enable extended debug support for DiBcom USB device
08.20.02.04.13、< > Terratec CinergyT2/qanu USB2 DVB-T receiver
08.20.02.04.14、[ ] sophisticated fine-tuning for CinergyT2 cards
(32) Number of queued USB Request Blocks for Highspeed Stream Transfers
(512) Size of URB Stream Buffers for Highspeed Transfers
(250) Status update interval [milliseconds]
08.20.02.04.15、[ ] Register the onboard IR Remote Control Receiver as Input Device
(100) Infrared Remote Controller update interval [milliseconds]
--- Supported FlexCopII (B2C2) Adapters
08.20.02.04.16、< > Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters
08.20.02.04.17、< > Technisat/B2C2 Air/Sky/Cable2PC PCI
08.20.02.04.18、< > Technisat/B2C2 Air/Sky/Cable2PC USB
08.20.02.04.19、[ ] Enable debug for the B2C2 FlexCop drivers
08.20.02.04.20、<M> B2C2/Technisat Air/Sky/CableStar 2 PCI
--- Supported BT878 Adapters
--- Supported DVB Frontends
08.20.02.05、Customise DVB Frontends --->
08.21、Graphics support ---> 图形支持
08.21.01、<*> Support for frame buffer devices
--- Enable Video Mode Handling Helpers
08.21.02、
Enable Tile Blitting Support
08.21.03、< > Cirrus Logic support
08.21.04、< > Permedia2 support
08.21.05、< > CyberPro 2000/2010/5000 support
08.21.06、[ ] Chips 69000 display support
08.21.07、[ ] IMS Twin Turbo display support
08.21.08、<*> VGA 16-color graphics support 启动后在屏幕左上角的那个小企鹅。
08.21.09、
VESA VGA graphics support 启动后在屏幕左上角的那个小企鹅。
08.21.10、<*> Hercules mono graphics support 从 08.21.10 到 08.21.25偶全去掉了。
08.21.11、< > nVidia Framebuffer Support
08.21.12、[ ] Enable DDC Support (NEW)
08.21.13、< > nVidia Riva support
08.21.14、< > Matrox acceleration
08.21.15、< > ATI Radeon display support (Old driver)
08.21.16、< > ATI Radeon display support
08.21.17、< > ATI Rage128 display support
08.21.18、< > ATI Mach64 display support
08.21.19、< > SiS acceleration
08.21.20、< > NeoMagic display support
08.21.21、< > IMG Kyro support
08.21.22、< > 3Dfx Banshee/Voodoo3 display support
08.21.23、< > 3Dfx Voodoo Graphics (sst1) support
08.21.24、< > Trident support
08.21.25、< > Epson S1D13XXX framebuffer support
08.21.26、< > Virtual Frame Buffer support (ONLY FOR TESTING!)
Console display driver support --->
Logo configuration ---> 启动后在屏幕左上角的那个小企鹅。最后,在grub的内核那一行后面插入:
ro root=/dev/hd??? vga=788 acpi=off devfs=mount 选项。重启即可。
08.21.27、
Backlight & LCD device support ---> LCD显示设备支持
--- Backlight & LCD device support
08.21.27.01、<M> Lowlevel Backlight controls
08.21.27.01、<M> Lowlevel LCD controls
08.22、Sound ---> 声卡驱动
<*> Sound card support
08.22.01、 Advanced Linux Sound Architecture ---> 这个声卡驱动特别好,高效能!强爽!播放HDTV得选它!偶试过用MPlayer播放HDTV,原来的声卡驱动用 Open Sound System ,播放一会儿MPlayer便自动退出。MPlayer用-nosound参数播放,HDTV无声,但能够正常播放。改用 Advanced Linux Sound Architecture ,一切正常。切记,不要选为<M> ,一定要选为<*>!!!
08.22.01.01、<*> Advanced Linux Sound Architecture
08.22.01.02、<*> Sequencer support
如果您对本文有任何疑问或者建议,请到讨论区发表您的意见:
>> 论坛入口 <<
上一页
1
2
3
4
5
6
7
8
9
10
11
12
13
下一页
上一篇:
破解Linux内核2.6
下一篇:
Fusyn+RTNPTL:Linux 实时健壮同步机制
【
文章评论
】 【
收藏本文
】 【
推荐好友
】 【
打印本文
】 【
我要投稿
】 【
论坛讨论
】
相关文章:
·
使用 Linux 系统调用的内核命令
·
Linux 和对称多处理
·
Relay:一种高效的数据传输技术
·
使用 SystemTap 调试内核
·
配置FreeBSD内核
·
在FreeBSD4.x中制作启动菜单
·
制作软盘上运行的FreeBSD系统
·
FreeBSD光盘运行版的制作过程
·
制作RAMDISK in KERNEL的NetBSD
·
制作RAMDISK in KERNEL的OpenBSD
文章评论:
(1条)
请留名:
匿名评论
点击查看所有评论
论坛讨论
声明:刊登此文章是为了传递更多信息,文章内容仅供参考,转载请注明出处。