legacy /proc/scsi/ support 08.07.03、 <*> SCSI disk support 偶青铜镜开始编译内核时，没把这选上，结果SATA硬盘的设备号由/dev/sda变成/dev/hde，还唱着沙哑的歌，跟偶闹心。偶急啊。把这项选上，设备号变成/dev/sda，硬盘才正常工作。 08.07.04、< > SCSI tape support SISC磁带机支持，服务器备份的工具。从 08.07.04 至 08.07.12.10 ，偶整不太明白，但觉得这些选项是和服务器相关的，跟偶台式机没搭界。因此，咔嚓了没商量。 08.07.05、< > SCSI OnStream SC-x0 tape support 08.07.06、< > SCSI CDROM support 08.07.07、< > SCSI generic support --- Some SCSI devices (e.g. CD jukebox) support multiple LUNs 08.07.08、[ ] Probe all LUNs on each SCSI device 08.07.09、[ ] Verbose SCSI error reporting (kernel size +=12K) 08.07.10、[ ] SCSI logging facility 08.07.11、SCSI Transport Attributes ---> 08.07.11.01、<M> Parallel SCSI (SPI) Transport Attributes 08.07.11.02、<M> FiberChannel Transport Attributes 08.07.11.03、 <M> iSCSI Transport Attributes 08.07.12、SCSI low-level drivers ---> 08.07.12.01、< > Adaptec I2O RAID support 08.07.12.02、[ ] LSI Logic New Generation RAID Device Drivers 08.07.12.03、< > LSI Logic Legacy MegaRAID Driver (NEW) 08.07.12.04、
Serial ATA (SATA) support 08.07.12.05、< > AHCI SATA support 08.07.12.06、< > ServerWorks Frodo / Apple K2 SATA support 08.07.12.07、< > Intel PIIX/ICH SATA support 08.07.12.08、< > Promise SATA TX2/TX4 support 08.07.12.09、< > Pacific Digital SATA QStor support 08.07.12.10、< > VIA SATA support 这个选项，偶青铜镜因为用VIA KT880+VT8237芯片组，就把它作为驱动编译加入内核，make以后提示没找到 VIA SATA 。出错了。把它做为模块加载入内核，编译正常。 08.07.12.10、< > VITESSE VSC-7174 SATA support 08.07.12.10、< > BusLogic SCSI support 08.07.12.10、[ ] Omit FlashPoint support 08.07.12.10、< > DMX3191D SCSI support 08.07.12.10、< > EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support 08.08、Multi-device support (RAID and LVM) ---> 08.08.01、[ ] Multiple devices driver support (RAID and LVM) 普通Linux用户通常不需要RAID（廉价冗余磁盘阵列）或者LVM支持。以下至08.08.10，我是全部去掉的. 08.08.02、< > RAID support 08.08.03、< > Linear (append) mode 08.08.04、< > RAID-0 (striping) mode 08.08.05、< > RAID-1 (mirroring) mode 08.08.06、< > RAID-4/RAID-5 mode 08.08.07、< > RAID-6 mode 08.08.08、< > Multipath I/O support 08.08.09、< > Faulty test module for MD 08.08.10、< > Device mapper support 08.09、Fusion MPT device support ---> 08.09.01、<M> Fusion MPT (base + ScsiHost) drivers (40) Maximum number of scatter gather entries 08.09.02、<M> Fusion MPT misc device (ioctl) driver 08.09.03、<M> Fusion MPT LAN driver 08.10、IEEE 1394 (FireWire) support ---> 笔记本上会用到，台式机特别是兼容机一般没有！偶的兼容机，当然没有这玩意，支掉没商量。以下至08.10.14，我是全部去掉的. 08.10.01、< > IEEE 1394 (FireWire) support --- Subsystem Options 08.10.02、[ ] Excessive debugging output 08.10.03、[ ] OUI Database built-in 08.10.04、[ ] Build in extra config rom entries for certain functionality 08.10.05、[ ] IP-1394 Entry --- Device Drivers 08.10.06、< > Texas Instruments PCILynx support 08.10.07、< > OHCI-1394 support --- Protocol Drivers 08.10.08、< > OHCI-1394 Video support 08.10.09、< > SBP-2 support (Harddisks etc.) 08.10.10、[ ] Enable Phys DMA support for SBP2 (Debug) 08.10.11、< > OHCI-DV I/O support 08.10.12、< > Raw IEEE1394 I/O support 08.10.13、< > IEC61883-1 Plug support 08.10.14、< > IEC61883-6 (Audio transmission) support 08.11、I2O device support ---> 08.11.01、<M> I2O support 08.11.02、<M> I2O Configuration support 08.11.03、<M> I2O Block OSM 08.11.04、<M> I2O SCSI OSM 08.11.05、<M> I2O /proc support 08.12、Networking support 网络支持。青铜镜友情提示：这个选项里面的小项，请谨慎谨慎再谨慎！否则，用上新内核后，却上不了网，够你郁闷三天天三夜。 08.12.01、
Networking support 08.12.02、Networking options ---> 08.12.02.01、<*> Packet socket 08.12.02.02、
IP: use netfilter MARK value as routing key 08.12.02.10、
IP: equal cost multipath 08.12.02.11、
IP: equal cost multipath with caching support (EXPERIMENTAL) 08.12.02.12、<M> MULTIPATH: round robin algorithm 08.12.02.13、<M> MULTIPATH: random algorithm 08.12.02.14、<M> MULTIPATH: weighted random algorithm 08.12.02.15、<M> MULTIPATH: interface round robin algorithm
设为主页
收藏本站
相关文章: